 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| M-Pulse Microwave Silicon Bipolar MMIC Cascadable Amplifier Features * Cascadable 50 Gain Block * 3dB Bandwidth: DC to 1.0 GHz * 15.0 dB Typical Gain @ 0.5 GHz * Unconditionally Stable (k>1) * 3.3 Volt Operation * Cost Effective Ceramic Microstrip Package * Tape and Reel Packaging Available MP4TD4135, MP4TD4136 Ceramic Microstrip Case Style Outlines1,2,3 Available in short lead version as MP4TD4136. 4 .085 2,16 RF OUT AND BIAS 3 .020 0,508 GND RF INPUT 1 Description M-Pulse's MP4TD4135 and MP4TD4136 are high performance silicon bipolar MMICs housed in a cost effective ceramic microstrip packages. The MP4TD4135 and MP4TD4136 are designed for use where a general purpose 50 gain block is required. Typical applications include narrow and wide band IF and RF amplifiers in industrial and military applications. The MP4TD4135 and MP4TD4136 are fabricated using a 10 GHz fT silicon bipolar technology that features gold metalization and IC passivation for increased performance and reliability. TYPICAL POWER GAIN vs FREQUENCY 18 16 14 GAIN (dB) 12 10 8 6 GAIN FLAT to DC 4 0.1 1 FREQUENCY (GHz) 10 Id=35mA .057 1,45 .455 .030 11,54 0,76 0.180 0.010 4,57 0,25 MA4TD4136 2 GND .100 2,54 o .083 2,11 .022 0,56 .006 .002 0,15 0,05 MA4TD4135 Notes: (unless otherwise specified) 1. Dimensions are in / mm 2. Tolerance: in .xxx = .005; mm .xx = .13 3. See last page of data sheet for short lead Micro-X Pin Configuration Pin Number 1 2&4 3 Pin Description RF Input AC/DC Ground RF Output and DC Bias Electrical Specifications @ TA = +25C, Id = 35 mA, Z0 = 50 Symbol Parameters Test Conditions Units 2) Gp f = 0.1 GHz dB Power Gain (S21 Gain Flatness f = 0.1 to 0.9 GHz dB Gp f3 dB 3 dB Bandwidth GHz SWRin Input SWR f = 0.1 to 1.5 GHz SWRout Output SWR f = 0.1 to 1.5 GHz P1dB Output Power @ 1dB Gain Compression f = 1.0 GHz dBm NF f = 1.0 GHz dB 50 Noise Figure IP3 Third Order Intercept Point f = 1.0 GHz dBm tD Group Delay f = 1.0 GHz ps Vd Device Voltage V dV/dT Device Voltage Temperature Coefficient mV/C Parameter Absolute Maximum Ratings1 Specification Subject to Change Without Notice Min. Typ. Max. 15.5 16.0 17.0 + 1.0 1.2 1.5 1.5 8.5 4.2 19.0 200 2.8 3.3 3.7 -5.0 Absolute Maximum 1 M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440 Silicon Bipolar MMIC Cascadable Amplifier Device Current 75 mA Power Dissipation2,3 200 mW RF Input Power +13 dBm Junction Temperature 200C Storage Temperature -65C to +200C Thermal Resistance: jc = 150 C/W 1. Exceeding these limits may cause permanent damage. 2. Case Temperature (Tc) = 25 C. 3. Derate at 6.7 mW/C for Tc > 170C. C (DC Block) IN 1 MP4TD4135, MP4TD4136 Typical Bias Configuration Rbias Id = Vcc - Vd Rbias Vcc > 5.5 V RFC (Optional) 4 C (DC Block) 3 MP4TD4135 MP4TD4136 Vd = 3.3 V OUT 2 Typical Performance Curves @ Id = 35 mA, TA = +25C (unless otherwise noted) DEVICE CURRENT vs DEVICE VOLTAGE Id, DEVICE CURRENT (mA) RETURN LOSS (dB) 50 45 40 35 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 Vd, DEVICE VOLTAGE (V) 3.0 3.5 4.0 0 -5 RETURN LOSS vs FREQUENCY INPUT -10 -15 -20 OUTPUT -25 -30 -35 0.1 1 FREQUENCY (GHz) 10 POWER GAIN vs CURRENT 18 16 14 GAIN (dB) 12 10 f= 2.0 GHz 8 6 4 10 15 20 25 30 35 Id, DEVICE CURRENT (mA) 40 45 50 f= 0.1 GHz POUT - 1dB (dBm) f= 0.5 GHz f= 1.0 GHz 14 13 12 11 10 9 8 7 6 5 4 POUT @ 1dB GAIN COMPRESSION vs FREQUENCY 0.1 1 FREQUENCY (GHz) 10 Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 2 FX (408) 432-3440 Silicon Bipolar MMIC Cascadable Amplifier MP4TD4135, MP4TD4136 NOISE FIGURE FREQUENCY 6.0 REVERSE ISOLATION (dB) NOISE FIGURE (dB) 5.5 Id=35mA 5.0 4.5 4.0 3.5 3.0 0.1 1 FREQUENCY (GHz) 10 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 REVERSE ISOLATION vs FREQUENCY 0.1 1 FREQUENCY (GHz) 10 Typical Scattering Parameters Z0 = 50, TA = +25C, Id = 35 mA Frequency S11 (GHz) Mag. Angle 0.1 0.023 -59.7 0.2 0.042 -80.2 0.3 0.061 -90.0 0.4 0.080 -98.0 0.5 0.101 -102.5 0.6 0.120 -107.1 0.7 0.141 -111.9 0.8 0.159 -115.8 0.9 0.177 -120.8 1.0 0.196 -124.6 1.5 0.278 -144.6 2.0 0.338 -161.6 2.5 0.394 -175.3 3.0 0.424 172.6 S21 Mag. 6.58 6.49 6.38 6.24 6.08 5.89 5.68 5.49 5.25 4.99 3.97 3.15 2.60 2.16 Angle 172.2 164.7 157.4 150.2 143.4 136.6 129.8 123.5 117.6 111.6 86.7 66.8 51.1 38.3 Mag. 0.100 0.101 0.104 0.107 0.110 0.113 0.117 0.122 0.127 0.133 0.153 0.169 0.178 0.188 S12 Angle 3.3 6.1 9.0 11.3 13.2 15.3 17.2 18.2 19.2 19.8 19.9 18.0 16.3 14.3 Mag 0.122 0.123 0.127 0.130 0.134 0.138 0.141 0.141 0.142 0.142 0.123 0.086 0.069 0.105 S22 Angle -15.0 -30.9 -43.7 -59.2 -72.1 -85.3 -96.9 -107.6 -114.8 -124.8 -152.7 -165.2 -146.3 -133.6 Ordering Information Long Lead Model No. MP4TD4135 MP4TD4135T Short Lead Model No. MP4TD4136 MP4TD4136T Package Ceramic Tape and Reel Mico-X Case Styles (Long Lead) (Short Lead) Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ 3 FX (408) 432-3440 |
Price & Availability of MP4TD4136T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |